Elements Emat Pro 200 Underfloor Heating

Bring an element of luxury to any tiled surface with the eMat Pro 200. This self-adhesive heating mat is specifically designed for fast and efficient installation directly onto most sub-based floors with the negligible increase in floor height. The eMat Pro's twin conductor heating cable means there is no second tail to return to the thermostat, saving installation time and cost.
200watt per sqm thin self adhesive twin conductor heating mat for concrete floors.

Emat pro 200 is a thin heating mat specifically designed to be installed within a tile adhesive layer. It evenly warms the floor surface eliminating the cold chill associated with hard floor surfaces. It is ideal for tiles on a Concrete Base floor or a conservatory floor and can be installed beneath other surfaces such as laminated floors and vinyl. Emat pro is a prefabricated, self adhesive matting with a thin heating cable pre fixed. It is an open mesh design allowing the tile adhesive to bond to an existing floor.
The mats are available in a range of sizes from 1-10 square metres. Each mat is 0.5 metres wide. For example, a 5 square metre mat is 0.5m wide and 10m long.
The heat output of this product can be regulated using a controller. Generally only one controller is needed for this product, one controller can controll up to per 33m2
This product can be used for Bathrooms/En-Suites and Kitchens. In fact, this system can be used in any room as long as the heating mat is covered by a flexible tile adhesive/self-levelling compound.